1.The Inclined Tube Precipitator can be used to treat the pretreatment of the river, river, lake and small sewage engineering.
2.The turbidity or suspended solids concentration is less than 500 mg/L in the year (short 1000 mg/L). It can remove the turbidity impurity particles, suspension colloid and so on, and the effluent can reach about 10 mg/L.
Original: Jiangsu, China
Certification: ISO9001, ISO14001, etc.
Voltage: 380V 50Hz, the voltage can be as local demand
Payment term: TT, LC
Delivery date: Negotiable
Packing: export standard
Market: Middle East/ Africa/Asia/South America/Europe/North America
Warranty: 1 year
MOQ: 1 set
Our product is based on the principle of removing the dispersed particles by the advection sedimentation tank, adding many inclined tubes in the pool, increasing the wet week of the area of the water cross section of the pool, and reducing the hydraulic radius. Therefore, the Reynolds number Re can be reduced greatly at the same horizontal velocity of V, thus reducing the flocculation of water and promoting the precipitation. In addition, the Tube Settler Media is added to shorten the settling distance of the particles, reduce the settling time and improve the sedimentation efficiency greatly.
Main design parameters
1. Surface load: 11 ~ 15m3/m2 / h;
2. The area effective coefficient μ: 0.7 ~ 0.8;
3. Inclined angle θ: generally 50 to 60 degrees;
5. Hydraulic retention time: 25 ~ 40min.
It can be used to treat the pretreatment of the river, river, lake and small sewage engineering. The turbidity or suspended solids concentration is less than 500 mg / L in the year (short 1000 mg / L). It can remove the turbidity impurity particles, suspension colloid and so on, and the effluent can reach about 10 mg / L.
Experience and markets
KHN is professional Inclined Tube Precipitator manufacturer. Products are well sailed all over the world, got many compliments from customers. KHN are specialized in Inclined Tube Precipitator with an experience of 10 years.
2.Process design and validation before bulk production.
3.Strictly control on all raw and auxiliary materials, All raw materials reach the world advanced level.
4.On-site inspection to all processes, inspection record keep traceable for 3 years.
5.All inspectors are skilled with international certificates.
6.Qualified WPS and professional welders guarantee welding quality.
100% inspection of finished sprouts before shipment.
7.Advanced and complete testing and inspection equipment: NDT, metal Microscope, impact tester, hardness tester...
8.Regular training for inspection staff