1.The Grit Classifier Water and Wastewater Treatment is mainly used for the further separation of sand and water mixture from the equipment such as the water saner and so on.
2.It is good for transportation and is generally applicable to domestic sewage treatment engineering.
Original: Jiangsu, China
Certification: ISO9001, ISO14001, etc.
Voltage: 380V 50Hz, the voltage can be as local demand
Payment term: TT, LC
Delivery date: Negotiable
Packing: export standard
Market: Middle East/ Africa/Asia/South America/Europe/North America
Warranty: 1 year
MOQ: 1 set
A cylindrical cyclone preseparator is set up in the sand water separator, and the sewage is sinks along the tangent direction of the cylinder, and the sand will sink. The larger proportion of the mixture in the mixture will be deposited at the bottom of the groove, and the sand is separated from the water by the acceleration of the cyclone. The sand is promoted along the bottom of the inclined U-shaped groove under the push of the spiral blade. After the liquid surface is opened, a certain distance goes on, and after the sand is fully dehydrated, the sand is discharged to the sand bucket through the sand drain, while the water separated from the sand is discharged from the overflow port to achieve the purpose of separation.
In addition, the overflow liquid reflow sand pool or fine screen well plays the role of pre settling sand and regulating water volume to increase the separation effect of it.
1. Our product runs smoothly without vibration, impact or abnormal noise.
2. The shaft spiral has enough strength and rigidity to ensure smooth sand grains and no delay resistance.
3. The driving device is located at the upper end of the it, without coupling, and is directly connected with the shaft without a shaft.
4. The product has a mechanical and electrical double overload protection device, which has the function of automatic load limiting and can satisfy intermittent or 24h continuous operation.
5. The U type groove can be replaced with linings.
6. The U groove is tightly sealed, and there is no leakage phenomenon in operation, and it is easy to dismantle and maintain.
7. The axial helix can be adjusted at axial length of not less than 10mm.
From Grit Classifier Water and Wastewater Treatment, it is mainly used for the equipment such as discharge of flow settling further separation of sand and Water mixture, to facilitate transportation, generally applicable to the wastewater treatment plant.
1. Screw conveying, no water bearing, light weight, easy maintenance.
2. Adopt new reducer, compact structure, smooth operation, easy installation.
3. U groove lined with flexible wear-resistant lining, low noise and convenient replacement.
4. The installation of the whole machine is simple and the operation is convenient.